Mold Detection Services, Inc. of South Florida, will test or sample for mold in homes,
apartments, workplaces, commercial properties, boats, and anywhere else mold grows.
Indoor Air Quality, Bulk, Swab, Bio Tape and Environmental Sample results are
generated with in 24 - 48 hours. 

A certified Mold Inspector and Indoor Environmentalist, utilizing the best equipment
available in the industry (Infrared Cameras, Laser Particle Counters, Etc.), will carry
out every inspection. We use only digital calibrated, custom made indoor air quality
testing pumps to insure you receive only accurate results. Consequently, our clients
will receive the highest quality service.

Our Inspection Services include a thorough inspection (utilizing Infrared Thermal Imaging,
Laser Particle Counts, Visual Observations) and follow-up testing (air samples, bulk,
swabs and glass slides), accompanied by an extensive report. In addition, we will be
working with a nationally accredited laboratory, dedicated to the production of accurate
data, via high-quality equipment, and staffed with professionals specialized in this field.

We will not be involved in the remediation of any mold problems, since this would be a
CONFLICT OF INTEREST. We do offer Mold Consulting Services to help you through the
remediation process and to protect your interests. We offer Post Remediation Inspection
and Testing to confirm the job has been done correctly.

Mold Detection Services will protect your interest.

The South Florida Mold Company You Can Trust!

305-571-2280 or 866-654-MOLD(6653)
   Laser Particle Counter, Buck Air Pump
    Calibration Pump, Zefon Bio-Pump


Air Sampling - Indoor Air Quality Testing: 

Indoor Air Samples are usually performed in order to test for nonviable (dead) mold
spores. Testing for nonviable mold is done by microscopic examination of the sample to
identify fungal and non-fungal particles that may be allergenic to individuals. Other particles
such as: fiberglass, insect fragments, rusts, dirts, and more are also detected during non-
viable testing. This is the quickest way to test for airborne mold spores and other harmful
particles.

Testing for viable (living) mold is done by placing the sample onto agar culture medium that
supports the growth of the organism(s) in question and allows identification of the species
and level of contamination. This takes more time and is more costly.

When colonization occurs one mold has overtaken your entire home. Colonization is the
formation of compact population groups of the same type of mold species.

• Bulk Sampling Bulk samples include, but are not limited to, chunks of carpet, insulation,
and wallboards. Bulk samples are collected from visibly moldy surfaces by scraping or
cutting materials with a clean tool and placing the sample into a petri dish for testing.

• Surface Sampling Surface samples are collected by wiping a measured area with a
sterile swab or by lifting a sample with bio tape. The surface sample is cultured and then
placed into a petri dish. Surface samples are collected by wiping a measured area with a
sterile swab or by lifting a sample with bio tape. The surface sample is cultured and then
placed into a petri dish. The petri dish is inspected by a lab technician under a microscope
so that the fungi can be removed and identified by species.

BACTERIAL TESTING SERVICES ARE ALSO AVAILABLE UPON REQUEST

Same Day Test Results Available - Standard Service is 24 - 48 hours

Certified Mold Testing, Inspection, Detection and Consulting

Clearance Testing & Post Remediation Inspections

Boca Raton Mold Testing & Consulting

Indoor Air Quality and Environmental Tests

Mold Detection Services, Inc.

Florida Mold Testing Companies

Miami Dade Mold Testing Services

We are certified mold remediation consultants that will monitor the remediation
process from start to finish. We start with a full inspection to pinpoint all of the
problem areas, monitor the remediation process and then perform post remediation
clearance inspection and testing.

• Certified Visual Inspections                • Infrared Thermal Camera Inspection 
• Protimeter Readings For Moisture      • ARTI Laser Particle Readings 
• Fiber Optic Boroscope Exams             • Hygrometer Readings- Temp & Humidity
• Certified Mold Dog Alerts                    • Digital Photographs Detailing Problems


INFRARED CAMERA

We offer Post Remediation Testing and Clearance Samples. Before you pay your
remediation company and release them from the job, make sure you have us perform
a proper post remediation inspection and testing. We have NO ethical conflicts of
Interest. Let us protect you! We will make sure your Indoor Air Quality and
Environment is healthy.


TESTING METHODS

Bulk/Surface Sampling. A certified inspector, trained in appropriate sampling
methodology, performs bulk or surface sampling. Bulk/Surface sampling should
be performed if the building inhabitants are suffering from health problems,
which are or may be associated with fungal exposure. Bulk/Surface sampling
should also be performed to identify the presence or absence of mold if a visual
inspection is equivocal (e.g. discoloration, and staining). Bulk samples are collected
from visibly moldy surfaces by scraping or cutting materials with a clean tool into
a clean plastic bag. Surface samples are collected by wiping a measured area with
a sterile swab or by stripping the suspect surface with
“Bio Tape lift”.

Carpet cassettesare designed for the collection of fibers and particulate from
carpets and other dusty areas. Carpet testing will give you historical data off
previous mold contamination Cassettes use a 1" piece of tubing with a 45 degree
bevel fitted to the inlet port, and come preloaded with .45µ & 5.0µ MCE filter and
support pad. Cassettes use a 3-piece styrene housing and helps prevent overloading.

Bio-Tapeprovides a simple, standardized method to sample for common bioaerosols
such as mold and fungi. It consists of a flexible plastic microscope slide with a pre-
defined 1" x 1" adhesive area. Each slide is provided with a unique serial number
for traceability. Air Monitoring. A certified inspector, trained in appropriate sampling
methodology, performs air monitoring. Air samples can be collected in various ways.

Anderson Style BioaerosolSampler imparts viable spores on petri dishes placed
in the apparatus at a rate of 28.3 cubic liters of air per minute. Results are provided
in colony forming units per cubic meter of air.

Air-O-Cell Cassettesare used for the rapid collection and analysis of a wide range
of airborne aerosols including mold spores, pollen, insect parts, fibers, fiberglass, and
skin fragments. This sampling device is useful in providing rapid analysis of airborne
contaminants. Test is performed at 15 liters per minute.

The Zefon 5Cell is capable of both personal and conventional air sampling. The Z 5 is
proven to have an exceptionally uniform collection trace and is virtually 100% accurate
for the entire fungal spore range. (d50 is less than 1 micron!) The Z 5 truly represents
the next generation. Test is performed at 5 liters per minute. This cassette collects a
wide range of airborne aerosols including mold spores, pollen, insect fragments, fibers,
fiber glass and skin fragments.

A Laser Particle Counteris used to assess indoor air quality and cleanliness of rooms.
The handheld device monitors environments to test for airborne particles. This device
will help track down particle source problems. Its intelligent design and overall utility
is invaluable in mold detection and making workplace environments safer and healthier.

The purpose of such air monitoring is to assess the extent of contamination throughout
the building. Sampling should be conducted while ventilation systems are operating.
Air monitoring should be performed if the presence of mold is suspected in a particular
area of the structure (e.g. a microbial volatile odor is detected) but cannot be identified
through a visual inspection. The purpose of such air monitoring is to determine the
location and/or extent of mold contamination. Air monitoring should also be performed
if the building inhabitants are suffering from health problems, which are or may be
associated with fungal exposure. If air monitoring should be performed, for comparative
purposes, outdoor air samples should be collected concurrently at an air intake, if possible,
and at a location representative of outdoor air. The outdoor control air test is very helpful
in evaluating whether there is an internally generated mold problem. Such a problem may
exist if indoor mold tests report mold levels that are either (a) higher than the outdoor
control air test or (b) present indoors but absent from the outdoor control air test.

CALL:   (305) 571-2280     or     (866) 654-MOLD(6653)

Mold Testing Services by Mold Detection Services of South Florida 
Fully Insured & Certified Mold Company


Hurricane and Storm Damage Help, Relief Agencies and Insurance Claims Tips